Rajesh Machines India Llp
Rajesh Machines India Llp
Dhebar Road, Rajkot, Gujarat
GST No. 24AAUFR3820P1ZK
TrustSEAL Verified
Call 0804861872676% Response Rate
SEND EMAIL

C Frame Hydraulic Press

Leading Manufacturer of hydraulic press machine price, hydraulic shearing machine and hydraulic power machine from Rajkot.

Hydraulic Press Machine Price

Hydraulic Press Machine Price
  • Hydraulic Press Machine Price
Get Best Quote
Approx. Price: Rs 2.51 Lakh / UnitGet Latest Price
Product Brochure

Product Details:

MaterialMild Steel
BrandRajesh
Usage/ApplicationIndustrial
Automation GradeFully Automatic
Frame TypeC-Frame
Model Name/NumberRHCP - 10

Frame Contraction: Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

 Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron/steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable if generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Request
Callback
Yes! I am Interested

Hydraulic Shearing Machine

Hydraulic Shearing Machine
  • Hydraulic Shearing Machine
  • Hydraulic Shearing Machine
  • Hydraulic Shearing Machine
  • Hydraulic Shearing Machine
Get Best Quote
Approx. Price: Rs 14.75 Lakh / UnitGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationSheet Cutting
BrandRajesh
MaterialMild Steel
Shearing Thickness4000 mm
Shearing Width4000 mm
Warranty1 Year
I Deal InNew Only

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Request
Callback
Yes! I am Interested

Hydraulic Power Machine

Hydraulic Power Machine
  • Hydraulic Power Machine
  • Hydraulic Power Machine
Get Best Quote
Approx. Price: Rs 12.21 Lakh / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
MaterialMild Steel
BrandRajesh
Usage/ApplicationIndustrial
Automation GradeFully Automatic
Warranty1 Year
Model Name/NumberRHCP - 100
I Deal InNew Only

Frame Contraction: Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

 Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron/steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable if generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Keyur Mahajan (Marketing Manager)
Rajesh Machines India Llp
New Nehru Nagar, Plot No. 7, No. 2, Kailashpati Society, Atika Industrial Area
Dhebar Road, Rajkot - 360002, Gujarat, India


Call Us


Send E-mail