Rajesh Machines (India) LLP
Rajesh Machines (India) LLP
Dhebar Road, Rajkot, Gujarat
GST No. 24AAUFR3820P1ZK
TrustSEAL Verified
Call 08048618726 60% Response Rate
SEND EMAIL

New Items

Pneumatic Power Press

Pneumatic Power Press
  • Pneumatic Power Press
Get Best Quote
Approx. Price: Rs 7.25 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberRHPN - 50
Automation GradeSemi-Automatic
Capacity50 Ton
BrandRajesh
Control TypePneumatic
PowerElectricla
I Deal InNew Only

Frame Contraction: C-Frame Pneumatic Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.

Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.

Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.

High Quality Crank Shaft: The strong crank shaft with outstanding rigidity ensures that accuracy can be maintained under qualified standard and extends the life of tooling.

Auto Lubrication System: The auto lubrication system with default monitor ensures high reliable operation.

Dual Safety Valve: The interlock mechanism on the dual valve keeps the clutch and brake from mis-actuation when valve is default.

Pneumatic dry Clutch: The fail-safe, pneumatically operated clutch brake combination is designed to provide excellent slide motion control even at high speeds. Adequate energy required for blanking operation is ensured by optimized design of the flywheel.  
Request
Callback
Yes! I am Interested

Metal Plate Shearing Machine

Metal Plate Shearing Machine
  • Metal Plate Shearing Machine
Get Best Quote
Approx. Price: Rs 5.5 Lakh / UnitGet Latest Price

Product Details:

Cutting MaterialMild Steel
Operation ModeManual
Max Shear Thickness2 mm
BrandRajesh
Size2030 x 2 mm
Capacity2030 mm
Model Name/NumberRUS - 3
Warranty1 Year
I Deal InNew Only

Frame Contraction: Rajesh Brand Guillotine Shears fabricated from IS-2062 graded. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load support. Thus the accuracy of the machine is never disturbed.

Bed: Super strong bed of closed box type construction, Street relieved in a furnace, forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed area also provided for machined pas across the bed for convenient setting of front gauge brackets any desired spacing. Depressions in the top at the bed provide ample clearance for fingers in handling sheets narrower than the bed.

Upper Beam: Ram is also of solid steel plates, carrying the upper knife. Its minimum weight ensure lesser load on the bearings, The upper beam moves in flat heat treated steel guide plates to avoid plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Hold-Down Mechanism: Solid clamping by powerful spring loads hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of versions in thickness. Hold down pressure in easily adjustable for clamping soft material. Different thickness of material can be cut without future adjustment with consistently accurate and burr free results.

Rolling Key Clutch: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Shear Knives: Knives are manufactured strictly as per standard material of HCHCr/OHNS. Every step from designing metallurgical specifications, heat treatment, grinding and inspection is carefully controlled. The blades are standards are standardized and are easily replaced.

Accurate Gauging: The Rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.  

Lubrication: Single shot lubricator provides oil to all the lubrication points, when necessary. Thus, all bearing parts and guide surface etc.

Drive: Drive through V-belts on flywheel and reduction gears are made of steel, hob cut for the smooth running and longer life.

Request
Callback
Yes! I am Interested

Sheet Metal Shearing Machine Price

Sheet Metal Shearing Machine Price
  • Sheet Metal Shearing Machine Price
Get Best Quote
Approx. Price: Rs 8.4 Lakh / UnitGet Latest Price

Product Details:

Operation ModeSemi-Automatic
Max Shear Thickness8 mm
BrandRajesh
Model Name/NumberRP-Cut VR - 2008
Capacity2000 x 8 mm
Length2000 mm
Warranty1 Year
I Deal InNew Only

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Request
Callback
Yes! I am Interested

Hydraulic Shearing Machine

Hydraulic Shearing Machine
  • Hydraulic Shearing Machine
Get Best Quote
Approx. Price: Rs 14.75 Lakh / UnitGet Latest Price

Product Details:

BrandRajesh
Usage/ApplicationSheet Cutting
MaterialMild Steel
Shearing Thickness4000 mm
Shearing Width4000 mm
Warranty1 Year
I Deal InNew Only

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Request
Callback
Yes! I am Interested

Bending Machine Manufacturers

Bending Machine Manufacturers
  • Bending Machine Manufacturers
Get Best Quote
Approx. Price: Rs 20 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Machine TypeSheet Bending
Capacity250T/4000 mm
Model Name/NumberRP-Bend 250T/4000
MaterialMild Steel
Usage/ApplicationIndustrial
Automation GradeSemi-Automatic
Bending Length4000 mm
Bending Force250T
Size25T/4000 mm
I Deal InNew Only
BrandRajesh

Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.

Table & Slide (Ram)Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.

Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.

Request
Callback
Yes! I am Interested

Small Press Brake

Small Press Brake
  • Small Press Brake
Get Best Quote
Approx. Price: Rs 4 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Machine TypeMild Steel
Capacity30T/2000 mm
Model Name/NumberRP-Bend 30T/2000 mm
MaterialMild Steel
Automation GradeSemi-Automatic
Bending Length2000 mm
I Deal InNew Only
BrandRajesh
Country of OriginMade in India

Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.

Table & Slide (Ram)Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.

Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.

Request
Callback
Yes! I am Interested

Metal Press Brake

Metal Press Brake
  • Metal Press Brake
Get Best Quote
Approx. Price: Rs 5.25 Lakh / UnitGet Latest Price

Product Details:

Machine TypeSheet Bending Machine
Capacity40T/2500 mm
Model Name/NumberRP-Bend 40T/2500 mm
MaterialMild Steel
Automation GradeSemi-Automatic
Bending Length2500 mm
I Deal InNew Only
BrandRajesh
Country of OriginMade in India

Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.

Table & Slide (Ram)Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.

Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.

Request
Callback
Yes! I am Interested

4 Roll Plate Rolling Machine

4 Roll Plate Rolling Machine
  • 4 Roll Plate Rolling Machine
Get Best Quote
Approx. Price: Rs 16.48 Lakh / UnitGet Latest Price

Product Details:

Usage/ApplicationIndustrial
BrandRajesh
MaterialMild Steel
Automation GradeAutomatic
PowerHydraulic
I Deal InNew Only
Max. Rolling Width2100 mm
Max. Rolling Capacity (5t X Top Roll)10 mm MS
Max. Pre Pinching Capacity (5t X Top Roll)8 mm MS
No. Of Rolls4 Rolls
Top Roll Diameter [Approx.]210 mm
Bottom Roll Diameter [Approx.]190 mm
Side Roll Diameter [Approx.]170 mm
Main Pump Motor H.P.7.5 HP

Standard Features of Model No. RP Roll 4H - 621 (with PLC & HMI):-

Ø  Top Roll & Bottom Roll are driven by Dual Planetary Gear Box & Hydro Motor

Ø  Top Roll Fixed, Bottom & Side Roll UP & Down movements by Hydraulic Cylinder with Synchronizing & Non-Synchronizing System.

Ø  Conical Bending Device available on request. (Cone bending, all bending values must be reduced to 40%)

Ø  Swing Arm Open & Close by Hydraulically Operated for removing the shell.

Ø  PLC base Control Panel.

Ø  Corded Remote Operating Panel with Colour Display Touch Screen HMI, with Push Button Selector Switches of Start, Stop, Emergency Stop, Delta Indicator, Roll Reverse & Forward, Left-Right Both Roll End A-B Separately Up & Down in Synchro / Non Synchro mode by Joy Stick, Auto & Manual mode, Swing Arm Open & Close, Position of Roll Display Graphically, Tower Light Indicator for functionally operation of machine.

Ø  Diameter of Roller Shaft may be vary ±5%.

Ø  These dimensions are consider as tentative, as day to day improvements are contemplated for better performance of the machine. We reserve all rights to alter the design, specifications, features, make etc. without prior notice.

 

Optional Features:-

Ø  Side Sheet Support, Top Sheet Support & Feeding Table will be charged extra if require.

Ø  Sections Bending Device will be available on request & will be charged extra if require.

Request
Callback
Yes! I am Interested

4 Roller Plate Bending Machine

4 Roller Plate Bending Machine
  • 4 Roller Plate Bending Machine
Get Best Quote
Approx. Price: Rs 17.01 Lakh / unitGet Latest Price

Product Details:

Minimum Order Quantity1 unit
Usage/ApplicationIndustrial
BrandRajesh
MaterialMild Steel
Capacity2100 x 13 mm
Model Name/NumberRP Roll 4H-1321
Automation GradeAutomatic
PowerHydraulic
Warranty1 Year
I Deal InNew Only
Max. Rolling Width2100 mm
Max. Rolling Capacity (5t X Top Roll)13 mm In MS
Max. Pre Pinching Capacity (5t X Top Roll)10 mm In MS
No. Of Rolls4 Nos.
Top Roll Diameter [Approx.]230 mm
Bottom Roll Diameter [Approx.]210 mm
Side Roll Diameter [Approx.]190 mm
Main Pump Motor H.P.7.5 HP

Standard Features of Model No. RP Roll 4H - 621 (with PLC & HMI):-

Ø  Top Roll & Bottom Roll are driven by Dual Planetary Gear Box & Hydro Motor

Ø  Top Roll Fixed, Bottom & Side Roll UP & Down movements by Hydraulic Cylinder with Synchronizing & Non-Synchronizing System.

Ø  Conical Bending Device available on request. (Cone bending, all bending values must be reduced to 40%)

Ø  Swing Arm Open & Close by Hydraulically Operated for removing the shell.

Ø  PLC base Control Panel.

Ø  Corded Remote Operating Panel with Colour Display Touch Screen HMI, with Push Button Selector Switches of Start, Stop, Emergency Stop, Delta Indicator, Roll Reverse & Forward, Left-Right Both Roll End A-B Separately Up & Down in Synchro / Non Synchro mode by Joy Stick, Auto & Manual mode, Swing Arm Open & Close, Position of Roll Display Graphically, Tower Light Indicator for functionally operation of machine.

Ø  Diameter of Roller Shaft may be vary ±5%.

Ø  These dimensions are consider as tentative, as day to day improvements are contemplated for better performance of the machine. We reserve all rights to alter the design, specifications, features, make etc. without prior notice.

 

Optional Features:-

Ø  Side Sheet Support, Top Sheet Support & Feeding Table will be charged extra if require.

Ø  Sections Bending Device will be available on request & will be charged extra if require.

Request
Callback
Yes! I am Interested

Hydraulic Steel Press

Hydraulic Steel Press
  • Hydraulic Steel Press
Get Best Quote
Approx. Price: Rs 1.57 Lakh / unitGet Latest Price

Product Details:

Minimum Order Quantity1 unit
MaterialMild Steel
BrandRajesh
Usage/ApplicationIndustrial
Automation GradeFully Automatic
Frame TypeH-Type
Model Name/NumberRHHP - 10

Frame Contraction: Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron/steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable if generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Request
Callback
Yes! I am Interested

CNC Shearing Machine

CNC Shearing Machine
  • CNC Shearing Machine
Get Best Quote
Approx. Price: Rs 7 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberRP Cut VR - 2006
Automation GradeSemi-Automatic
MaterialMild Steel
Brand/MakeRajesh
Machine Capacity2000 x 6 mm
LayoutHorizontal
Phase3 Phase
Country of OriginMade in India

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN - 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Request
Callback
Yes! I am Interested

High Speed Punching Machine

High Speed Punching Machine
  • High Speed Punching Machine
Get Best Quote
Approx. Price: Rs 3.25 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Usage/Applicationpunching
BrandRajesh
Power SourceElectrical
Model Name/NumberRCPN - 10

Frame Contraction: C-Frame Pneumatic Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.

Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.

Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.

High Quality Crank Shaft: The strong crank shaft with outstanding rigidity ensures that accuracy can be maintained under qualified standard and extends the life of tooling.

Auto Lubrication System: The auto lubrication system with default monitor ensures high reliable operation.

Dual Safety Valve: The interlock mechanism on the dual valve keeps the clutch and brake from mis-actuation when valve is default.

Pneumatic dry Clutch: The fail-safe, pneumatically operated clutch brake combination is designed to provide excellent slide motion control even at high speeds. Adequate energy required for blanking operation is ensured by optimized design of the flywheel.  
Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Product

View All Product


Reach Us
Chetan Siddhapura (Director)
Rajesh Machines (India) LLP
New Nehru Nagar, Plot No. 7, No. 2, Kailashpati Society, Atika Industrial Area
Dhebar Road, Rajkot - 360002, Gujarat, India


Call Us


Send E-mail