Product Details:
Usage/Application | Industrial |
Model Name/Number | RCP - 20 |
Load | 20 Ton |
Power Source | Mechanical |
Hole In Bed | 83 mm |
Brand | Rajesh |
Bed Size | 508 x 305 mm |
Tonnage | 20 Ton |
Crank Shaft Diameter | 76 mm |
Stroke Length | 76 mm |
Stroke Adjustment | 13 - 76 mm |
Distance Bed to Ram | 280 mm |
Hole in Ram | 32 mm |
Fly Wheel Diameter | 550 mm |
Motor HP Required | 2 HP |
Length | 1240 mm |
Width | 1220 mm |
Weight Approx | 1020 mm |
Height | 1830 mm |
Frame Contraction: High Speed Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.
Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.
Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.
Rolling Key Clutch: Made of alloy steel for positive engagement and continues operation heavy three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.
Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.
Lubrication System: Single shot lubrication provides oil to all the lubrication point, where necessary, thus all bearing parts and guide surface etc.
Product Details:
Model Name/Number | RCP-30 |
Brand | Rajesh |
Hole In Bed | 89 mm |
Bed Size | 558 x 356 mm |
Tonnage | 30T |
Crank Shaft Diameter | 158 mm |
Stroke Length | 76 mm |
Stroke Adjustment | 13-76 mm |
Distance Bed to Ram | 292 mm |
Hole in Ram | 38 mm |
Ffy Wheel Diameter | 660 mm |
Motor HP Required | 3 HP |
Length | 1325 mm |
Width | 1300 mm |
Weight Approx | 1350 Kgs |
Height | 1920 mm |
Frame Contraction: High Speed Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.
Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.
Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.
Rolling Key Clutch: Made of alloy steel for positive engagement and continues operation heavy three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.
Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.
Lubrication System: Single shot lubrication provides oil to all the lubrication point, where necessary, thus all bearing parts and guide surface etc.
Product Details:
Usage/Application | Industrial |
Model Name/Number | RCP-10T |
Load | 10 Ton |
Power Source | Mechanical |
Brand | Rajesh |
Hole In Bed | 76 mm |
Bed Size | 381 x 255 mm |
Tonnage | 10 Ton |
Crank Shaft Diameter | 60 mm |
Stroke Length | 51 mm |
Stroke Adjustment | 6-51 mm |
Distance Bed to Ram | 205 |
Hole in Ram | 25 mm |
Ffy Wheel Diameter | 435 |
Motor HP Required | 1 HP |
Length | 1100 mm |
Width | 1070 mm |
Weight Approx | 525 mm |
Height | 1525 mm |
Frame Contraction: High Speed Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.
Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.
Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.
Rolling Key Clutch: Made of alloy steel for positive engagement and continues operation heavy three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.
Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.
Lubrication System: Single shot lubrication provides oil to all the lubrication point, where necessary, thus all bearing parts and guide surface etc.