Rajesh Machines India Llp
Dhebar Road, Rajkot, Gujarat
GST No. 24AAUFR3820P1ZK
TrustSEAL Verified
Call 0804861872676% Response Rate
SEND EMAIL
Product Details:
| Brand | Rajesh |
| Capacity | 60Ton |
| Size | 60T/2000 |
| Usage/Application | Industrial |
| Automation Grade | Semi Automatic |
| Max Sheet Width | 2 meter |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.
Product Details:
| Automation Grade | Fully-automatic |
| Power | Electrical |
| Material | Mild Steel |
| Bending Material | Plate |
| Model Name/Number | RP-Bend CNC 210T/3100 |
| Machine Capacity | 210T/3100 mm |
| Brand | Rajesh |
| Power Source | Hydraulic |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Automation Grade | Fully-automatic |
| Power | Electrical |
| Material | Mild Steel |
| Bending Material | Plate |
| Model Name/Number | RP-Bend CNC 210T/4100 |
| Machine Capacity | 210T/4100 mm |
| Brand | Rajesh |
| Power Source | Hydraulic |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Fully-automatic |
| Material | Mild Steel |
| Bending Material | Plate |
| Model Name/Number | RP-Bend CNC 250T/6100 mm |
| Machine Capacity | 250T/6100 mm |
| Brand | Rajesh |
| Power Source | Hydraulic |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Fully-automatic |
| Material | Mild Steel |
| Bending Material | Plate |
| Model Name/Number | RP-Bend CNC 210T/6100 mm |
| Machine Capacity | 210T/6100 mm |
| Brand | Rajesh |
| Power Source | Hydraulic |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Fully-automatic |
| Material | Mild Steel |
| Bending Material | Plate |
| Model Name/Number | RP-Bend CNC 250T/5100 |
| Machine Capacity | 250T/5100 mm |
| Brand | Rajesh |
| Power Source | Hydraulic |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Sheet Bending |
| Material | Mild Steel |
| Brand | Rajesh |
| Control Type | Non-CNC |
| Size | 20T/1500 mm |
| Automation Grade | Semi-Automatic |
| Max Sheet Width | 1500 mm |
| Country of Origin | Made in India |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Sheet Bending |
| Capacity | 100 Ton |
| Material | Mild Steel |
| Brand | Rajesh |
| Control Type | Non-CNC |
| Size | 100T/4000 |
| Automation Grade | Semi-Automatic |
| Max Sheet Width | 4 meter |
| Country of Origin | Made in India |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Fully-automatic |
| Material | Mild Steel |
| Bending Material | Plate |
| Model Name/Number | RP-Bend CNC 250T/4100 mm |
| Machine Capacity | 250T |
| Brand | Rajesh |
| Power Source | Hydraulic |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Fully-automatic |
| Material | Mild Steel |
| Bending Material | Plate |
| Model Name/Number | RP-Bend CNC 250T/6100 mm |
| Machine Capacity | 250T/6100 mm |
| Brand | Rajesh |
| Power Source | Hydraulic |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Sheet Bending |
| Material | Mild Steel |
| Brand | Rajesh |
| Control Type | Non-CNC |
| Size | 50T/1500 mm |
| Automation Grade | Semi-Automatic |
| Max Sheet Width | 1500 mm |
| Country of Origin | Made in India |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.
Product Details:
| Brand | Rajesh |
| Size | 150T/3100 |
| Automation Grade | Fully Automatic |
| Control Axis | 3 Axis / 4 Axis / 5 Axis |
| Layout | Horizontal |
| Brand/Make | Rajesh |
| Bending Force | 150 Ton |
| Working Length | 3100 mm |
| Distance Between Uprights | 2550 mm |
| Throat Depth | 300 mm |
| Daylight | 400 mm |
| Punch Stroke | 175 mm |
| Table Width | 170 mm |
CNC CONTROL UNIT
Rajesh has chosen the very powerful Cyb Touch 8 PS CNC Control, Which has been
Specially design for bending. Some of the features are:
EASY OPERATING:
BETTER BENDING:
Ø Various automatic calculation of bend function.
Ø Bending sequences and programs can be memorized.
Ø Angle, pressure and crowing management.
POWERFUL:
Ø Control 3 axes (with optional 4th axis).
Ø 2D graphic profile creation with manual sequencing.
Ø Bend allowance calculation.
Ø Pressure-crowning.
Ø Modular tools for each part or bend.
Ø Angle and back gauge correction.
Ø Telemaintenance via wireless connection with PC or notebook.
Ø USB port for memory stick for data transfer/backup.
BACKGAUGE:
· X, Precision servo-drive back guage
· High-Speed with HIWIN liner guides.
· Driven by Schneider Servo Motor and Drives.
· Complete Backgauge fingers on Single linear guide
· X-axis speed up to 400 mm/sec & accuracy to 0,01 mm.
Perfect Positioning:
Rajesh CNC Press Brake is equipped with a Back gauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
Advantage:
· High-speed Free Fall
· High Bending Speed.
· High Return Speed.
· Very low noice level.
Finger
Specially designed finger stops offering high accuracy and maximum flexibility even in conical bend.
Front Support
Front supports are very useful when working with large and wide sheet metal pieces. Each front support is mounted on linear guides and can move along the length of the machine. There is also a possibility to adjust the height of the supports with a hand wheel. The heavy duty construction ensures that even heavy sheet metal pieces can be loaded.
Product Details:
| Material | Mild Steel |
| Brand | Rajesh |
| Usage/Application | Industrial |
| Size | 80T/2000 |
| Automation Grade | Semi Automatic |
| Max Sheet Width | 2 meter |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.
Product Details:
| Material | Mild Steel |
| Brand | Rajesh |
| Usage/Application | Industrial |
| Size | RP-Bend 100T/*2000 |
| Automation Grade | Semi Automatic |
| Max Sheet Width | 2 meter |
| Model | RP-Bend 100T/2000 |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.
Product Details:
| Material | Mild Steel |
| Brand | Rajesh |
| Size | 100T/2500 |
| Usage/Application | Industrial |
| Max Sheet Width | 2500 mm |
| Length | 2500 mm |
| Tonnage | 100T |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Machine Type | Sheet Bending Machine |
| Capacity | 100T/3000 |
| Model Name/Number | RP-Bend 100T/3000 |
| Material | Mild Steel |
| Automation Grade | Semi-Automatic |
| Bending Length | 3000 mm |
| I Deal In | New Only |
| Brand | Rajesh |
| Country of Origin | Made in India |
Frame Contraction: Frame is made of steel fabrication construction of interlock robust design. Machine are constructed with safe guard against undesired deflections and breakage. This frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provide extremely high rigidity, alignment, accuracy and keeps frame structure at the right angles to the bed.
Table & Slide (Ram): Table and upper beam are straight and parallel of the working surface under the rated load. The table is accurately machined and upper surface is grinded to keep the die in correct alignment. The upper beam is guided and supported throughout the stroke by accurately machines guide ways.
Tooling: Tooling is manufactured strictly as per standard EN-31. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The tooling are standardized and easily replaced.
Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
Hydraulic System: The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.
Electrical Control Panel: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.
Accurate Gauging: The rigid and accurate construction of the back gauge provided with machine allows consistency in width of sheet being Bend.