Rajesh Machines India LLP
Rajkot, Gujarat
GST No. 24AAUFR3820P1ZK
TrustSEAL Verified
Call 08048618726 53% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Unit |
| Capacity | 30 ton |
| Model Name/Number | RCP - 30 |
| Brand | Rajesh |
| Color | Orange |
| Material | Mild Steel |
| Automation Grade | Manual |
| Country of Origin | Made in India |
Frame Contraction: High Speed Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.
Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.
Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.
Rolling Key Clutch: Made of alloy steel for positive engagement and continues operation heavy three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.
Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.
Lubrication System: Single shot lubrication provides oil to all the lubrication point, where necessary, thus all bearing parts and guide surface etc.
Product Details:
| Capacity | 20 Ton |
| Model Name/Number | RCP - 20 |
| Brand | Rajesh |
| Main Motor Power | 2 HP |
| Material | Mild Steel |
| Automation Grade | Manual |
Frame Contraction: High Speed Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.
Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.
Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.
Rolling Key Clutch: Made of alloy steel for positive engagement and continues operation heavy three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.
Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.
Lubrication System: Single shot lubrication provides oil to all the lubrication point, where necessary, thus all bearing parts and guide surface etc.
Product Details:
| Capacity | 20 Ton |
| Model Name/Number | RCP - 20 |
| Brand | Rajesh |
| Material | Mild Steel |
| Size | 20 Ton |
| Automation Grade | Manual |
Frame Contraction: High Speed Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.
Table & Slide (Ram): Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.
Main and Pinion Shaft: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.
Rolling Key Clutch: Made of alloy steel for positive engagement and continues operation heavy three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
Gears: Gears are of steel cast of fabricated. Gear teeth are generated by precision hobbing machine.
Flywheel: Properly sized flywheel is made of high grade cast iron, for strong and releasing adequate energy for the cutting operation, and properly balanced for smooth running.
Lubrication System: Single shot lubrication provides oil to all the lubrication point, where necessary, thus all bearing parts and guide surface etc.
Product Details:
| Usage/Application | Industrial |
| Material | Mild Steel |
| Brand | Rajesh |
| Automation Grade | Automatic |
| Power | Hydraulic |
| I Deal In | New Only |
| Max. Rolling Width | 2100 mm |
| Max. Rolling Capacity (5t X Top Roll) | 10 mm MS |
| Max. Pre Pinching Capacity (5t X Top Roll) | 8 mm MS |
| No. Of Rolls | 4 Rolls |
| Top Roll Diameter [Approx.] | 210 mm |
| Bottom Roll Diameter [Approx.] | 190 mm |
| Side Roll Diameter [Approx.] | 170 mm |
| Main Pump Motor H.P. | 7.5 HP |
Standard Features of Model No. RP Roll 4H - 621 (with PLC & HMI):-
Ø Top Roll & Bottom Roll are driven by Dual Planetary Gear Box & Hydro Motor
Ø Top Roll Fixed, Bottom & Side Roll UP & Down movements by Hydraulic Cylinder with Synchronizing & Non-Synchronizing System.
Ø Conical Bending Device available on request. (Cone bending, all bending values must be reduced to 40%)
Ø Swing Arm Open & Close by Hydraulically Operated for removing the shell.
Ø PLC base Control Panel.
Ø Corded Remote Operating Panel with Colour Display Touch Screen HMI, with Push Button Selector Switches of Start, Stop, Emergency Stop, Delta Indicator, Roll Reverse & Forward, Left-Right Both Roll End A-B Separately Up & Down in Synchro / Non Synchro mode by Joy Stick, Auto & Manual mode, Swing Arm Open & Close, Position of Roll Display Graphically, Tower Light Indicator for functionally operation of machine.
Ø Diameter of Roller Shaft may be vary ±5%.
Ø These dimensions are consider as tentative, as day to day improvements are contemplated for better performance of the machine. We reserve all rights to alter the design, specifications, features, make etc. without prior notice.
Optional Features:-
Ø Side Sheet Support, Top Sheet Support & Feeding Table will be charged extra if require.
Ø Sections Bending Device will be available on request & will be charged extra if require.
Product Details:
| Minimum Order Quantity | 1 unit |
| Usage/Application | Industrial |
| Brand | Rajesh |
| Automation Grade | Automatic |
| Capacity | 2100 x 13 mm |
| Model Name/Number | RP Roll 4H-1321 |
| Power | Hydraulic |
| Warranty | 1 Year |
| I Deal In | New Only |
| Material | Mild Steel |
| Max. Rolling Width | 2100 mm |
| Max. Rolling Capacity (5t X Top Roll) | 13 mm In MS |
| Max. Pre Pinching Capacity (5t X Top Roll) | 10 mm In MS |
| No. Of Rolls | 4 Nos. |
| Top Roll Diameter [Approx.] | 230 mm |
| Bottom Roll Diameter [Approx.] | 210 mm |
| Side Roll Diameter [Approx.] | 190 mm |
| Main Pump Motor H.P. | 7.5 HP |
Standard Features of Model No. RP Roll 4H - 621 (with PLC & HMI):-
Ø Top Roll & Bottom Roll are driven by Dual Planetary Gear Box & Hydro Motor
Ø Top Roll Fixed, Bottom & Side Roll UP & Down movements by Hydraulic Cylinder with Synchronizing & Non-Synchronizing System.
Ø Conical Bending Device available on request. (Cone bending, all bending values must be reduced to 40%)
Ø Swing Arm Open & Close by Hydraulically Operated for removing the shell.
Ø PLC base Control Panel.
Ø Corded Remote Operating Panel with Colour Display Touch Screen HMI, with Push Button Selector Switches of Start, Stop, Emergency Stop, Delta Indicator, Roll Reverse & Forward, Left-Right Both Roll End A-B Separately Up & Down in Synchro / Non Synchro mode by Joy Stick, Auto & Manual mode, Swing Arm Open & Close, Position of Roll Display Graphically, Tower Light Indicator for functionally operation of machine.
Ø Diameter of Roller Shaft may be vary ±5%.
Ø These dimensions are consider as tentative, as day to day improvements are contemplated for better performance of the machine. We reserve all rights to alter the design, specifications, features, make etc. without prior notice.
Optional Features:-
Ø Side Sheet Support, Top Sheet Support & Feeding Table will be charged extra if require.
Ø Sections Bending Device will be available on request & will be charged extra if require.