Shearing Machine

Product Details:

STANDARD FEATURES:

1. Ø  Frame produced in India by Rajesh accurately dimensioned through FEA
2. Ø  Multi-edge blades for cutting Aluminum, Carbon steel, Stainless steel
3. Ø  Cutting-line illumination and wire for shadow-line cutting
4. Ø  Stroke counter
5. Ø  Quick cutting-length adjustment
6. Ø  Hydraulic and electrical overload protection
7. Ø  Squaring arm and front support arms
8. Ø  Bed infill plates with ball screw and polished rod with 0.01 mm accuracy
9. Ø  Delta inverter with ball screw and polished rod with 0.01 mm accuracy
10. Ø  Back gauge adjustment according to blade gap
11. Ø  Back gauge retraction features
12. Ø  Sub-program and programming loop
13. Ø  Sequence repeat function
14. Ø  Auto-cutting (Flying cut)

OPTIONAL FEATURES:

1. Ø Pneumatic Sheet Supporting System
2. Ø Table Mounted sheet Angle Cutting Gauge
3. Ø Estun E200-S Controller
4. Ø Delem DAC310 Controller
5. Ø Elgo P40 Controller

Additional Information:

• Delivery Time: 5 - 6 Week

Product Details:

STANDARD FEATURES:

1. Ø  Frame produced in India by Rajesh accurately dimensioned through FEA
2. Ø  Multi-edge blades for cutting Aluminum, Carbon steel, Stainless steel
3. Ø  Cutting-line illumination and wire for shadow-line cutting
4. Ø  Stroke counter
5. Ø  Quick cutting-length adjustment
6. Ø  Hydraulic and electrical overload protection
7. Ø  Squaring arm and front support arms
8. Ø  Bed infill plates with ball screw and polished rod with 0.01 mm accuracy
9. Ø  Delta inverter with ball screw and polished rod with 0.01 mm accuracy
10. Ø  Back gauge adjustment according to blade gap
11. Ø  Back gauge retraction features
12. Ø  Sub-program and programming loop
13. Ø  Sequence repeat function
14. Ø  Auto-cutting (Flying cut)

OPTIONAL FEATURES:

1. Ø Pneumatic Sheet Supporting System
2. Ø Table Mounted sheet Angle Cutting Gauge
3. Ø Estun E200-S Controller
4. Ø Delem DAC310 Controller
5. Ø Elgo P40 Controller

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Contraction: Rajesh Brand Guillotine Shears fabricated from IS-2062 graded. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load support. Thus the accuracy of the machine is never disturbed.

Bed: Super strong bed of closed box type construction, Street relieved in a furnace, forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed area also provided for machined pas across the bed for convenient setting of front gauge brackets any desired spacing. Depressions in the top at the bed provide ample clearance for fingers in handling sheets narrower than the bed.

Upper Beam: Ram is also of solid steel plates, carrying the upper knife. Its minimum weight ensure lesser load on the bearings, The upper beam moves in flat heat treated steel guide plates to avoid plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Hold-Down Mechanism: Solid clamping by powerful spring loads hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of versions in thickness. Hold down pressure in easily adjustable for clamping soft material. Different thickness of material can be cut without future adjustment with consistently accurate and burr free results.

Rolling Key Clutch: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Shear Knives: Knives are manufactured strictly as per standard material of HCHCr/OHNS. Every step from designing metallurgical specifications, heat treatment, grinding and inspection is carefully controlled. The blades are standards are standardized and are easily replaced.

Accurate Gauging: The Rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.  

Lubrication: Single shot lubricator provides oil to all the lubrication points, when necessary. Thus, all bearing parts and guide surface etc.

Drive: Drive through V-belts on flywheel and reduction gears are made of steel, hob cut for the smooth running and longer life.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Contraction: Rajesh Brand Guillotine Shears fabricated from IS-2062 graded. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load support. Thus the accuracy of the machine is never disturbed.

Bed: Super strong bed of closed box type construction, Street relieved in a furnace, forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed area also provided for machined pas across the bed for convenient setting of front gauge brackets any desired spacing. Depressions in the top at the bed provide ample clearance for fingers in handling sheets narrower than the bed.

Upper Beam: Ram is also of solid steel plates, carrying the upper knife. Its minimum weight ensure lesser load on the bearings, The upper beam moves in flat heat treated steel guide plates to avoid plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Hold-Down Mechanism: Solid clamping by powerful spring loads hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of versions in thickness. Hold down pressure in easily adjustable for clamping soft material. Different thickness of material can be cut without future adjustment with consistently accurate and burr free results.

Rolling Key Clutch: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Shear Knives: Knives are manufactured strictly as per standard material of HCHCr/OHNS. Every step from designing metallurgical specifications, heat treatment, grinding and inspection is carefully controlled. The blades are standards are standardized and are easily replaced.

Accurate Gauging: The Rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.  

Lubrication: Single shot lubricator provides oil to all the lubrication points, when necessary. Thus, all bearing parts and guide surface etc.

Drive: Drive through V-belts on flywheel and reduction gears are made of steel, hob cut for the smooth running and longer life.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN  8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN - 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN - 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

STANDARD FEATURES:

1. Ø  Frame produced in India by Rajesh accurately dimensioned through FEA
2. Ø  Multi-edge blades for cutting Aluminum, Carbon steel, Stainless steel
3. Ø  Cutting-line illumination and wire for shadow-line cutting
4. Ø  Stroke counter
5. Ø  Quick cutting-length adjustment
6. Ø  Hydraulic and electrical overload protection
7. Ø  Squaring arm and front support arms
8. Ø  Bed infill plates with ball screw and polished rod with 0.01 mm accuracy
9. Ø  Delta inverter with ball screw and polished rod with 0.01 mm accuracy
10. Ø  Back gauge adjustment according to blade gap
11. Ø  Back gauge retraction features
12. Ø  Sub-program and programming loop
13. Ø  Sequence repeat function
14. Ø  Auto-cutting (Flying cut)

OPTIONAL FEATURES:

1. Ø Pneumatic Sheet Supporting System
2. Ø Table Mounted sheet Angle Cutting Gauge
3. Ø Estun E200-S Controller
4. Ø Delem DAC310 Controller
5. Ø Elgo P40 Controller

Additional Information:

• Delivery Time: 4-5 Week

Product Details:

Frame Contraction: Rajesh Brand Guillotine Shears fabricated from IS-2062 graded. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load support. Thus the accuracy of the machine is never disturbed.

Bed: Super strong bed of closed box type construction, Street relieved in a furnace, forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed area also provided for machined pas across the bed for convenient setting of front gauge brackets any desired spacing. Depressions in the top at the bed provide ample clearance for fingers in handling sheets narrower than the bed.

Upper Beam: Ram is also of solid steel plates, carrying the upper knife. Its minimum weight ensure lesser load on the bearings, The upper beam moves in flat heat treated steel guide plates to avoid plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Hold-Down Mechanism: Solid clamping by powerful spring loads hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of versions in thickness. Hold down pressure in easily adjustable for clamping soft material. Different thickness of material can be cut without future adjustment with consistently accurate and burr free results.

Rolling Key Clutch: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Shear Knives: Knives are manufactured strictly as per standard material of HCHCr/OHNS. Every step from designing metallurgical specifications, heat treatment, grinding and inspection is carefully controlled. The blades are standards are standardized and are easily replaced.

Accurate Gauging: The Rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.  

Lubrication: Single shot lubricator provides oil to all the lubrication points, when necessary. Thus, all bearing parts and guide surface etc.

Drive: Drive through V-belts on flywheel and reduction gears are made of steel, hob cut for the smooth running and longer life.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.

Product Details:

Frame Construction: Hydraulic Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table: Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.

Upper Beam: Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Rake Angle (Cutting Angle) Adjustment: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material thicknesses without twist distortion.  

Hold-Down: Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results. 

Blade (Knife): Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Blade Clearance (Blade Gap): The shears are equipped with leavers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet thickness. The setting can be done shiftily and quickly without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr-free cutting results and improves blade life considerably.

Cylinder: The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System: The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.